To Paint An Aluminum Mailbox

Home » Mailbox » To Paint an Aluminum Mailbox

Aluminum mailbox parts – If you have driven down most any neighborhood street, you probably noticed paint chipping from more than an aluminum mailbox. The culprit in this type of wear is almost invariably poor pretreatment. Since metal surfaces are slick and non-porous, they must be conditioned before the paint will adhere to them. Unfortunately, aluminum durability friction-based abrasion techniques useless. You will need to apply a special type of primer that will abrade the surface of the mailbox, or you will eventually end up with chipping and peeling.

Posted on February 17, 2017 Mailbox With 0 comments

Starting paint an aluminum mailbox with remove the address number of the mailbox. If they are screw on, use a screwdriver. Then, using a water-based degreaser to clean Scrub the aluminum mailbox. Rinse mailbox with a water hose. Allow the surface to dry completely, and then scrape away any loose or flaking paint from the mailbox by using a plastic spatula.

12 Photos Gallery of: To Paint an Aluminum Mailbox

Solid Aluminum MailboxSize: 1000 x 750

Pretty Aluminum MailboxSize: 1000 x 1000

Fancy Aluminum MailboxSize: 800 x 1067

Custom Aluminum MailboxSize: 1000 x 1000

Aluminum Mailbox StyleSize: 920 x 1227

Aluminum Mailbox PostSize: 803 x 1000

Aluminum Mailbox ModelSize: 1000 x 1000

RELATED TOPIC :   Anything Can Be Painted, also Contemporary Mailboxes

To the mailbox flag and other areas in the mailbox you want left unpainted, apply painter’s tape. Apply a rust spray sealer to all areas of rust aluminum mailbox. Apply a coat of etching primer to the entire mailbox after allow the sealer to dry. Allow the etching primer for 4 hours, and then apply two coats of acrylic spray paint. Allow two hours drying time between coats.