Make A Covered Toilet Paper Dispenser
Toilet paper dispenser – A covered toilet paper dispenser, you can store a must have in your bathroom without having to show it. There are many machines that can be sold in stores, but you can make your own basic material from your hardware store. This dispenser consists of two parts: the dispenser and a removable cover. You can paint and color the dispenser to match your personal taste.
Make a covered toilet paper dispenser; cut a 6-inch circle of 1/2-inch plywood with a jigsaw. Sand the surface of the plywood with 180-grit sandpaper to smooth it. Brush the stain in any color of the plywood. Then wait for the time recommended on the spot S can and wipe off the excess with a rag. And then let dry plywood. Place a 1-inch chrome flange in the middle of the circle and indicate where the screw holes with a pencil. Then drill 1/16-inch pilot holes in these marks. Screw the flange of the circle with the screws. And then screw a 5-inch double threaded chromium tube with a 1-inch diameter of the flange. Then screw a 1-inch chrome end cap on the tube. This completes the dispenser. Slide a roll of toilet paper on the tube.
12 Photos Gallery of: Make a Covered Toilet Paper Dispenser
As a result cut a 6-inch section of 6-inch PVC pipe with a hacksaw. Sand the pipe section with 180-grit sandpaper. Apply a bead of PVC glue along the inside edge of the pipe section. Then place a 6-inch PVC end plug in the pipe section. Resend the outside of the lid. Spray two thin coats of primer on the cover, making each layer to dry completely. Spray two coats of paint in any color on the lid. Let the paint dry. Glue a decorative knob at the top of the cap with epoxy. This will serve as a handle. Finally allow the epoxy to dry, and place the lid on the toilet paper dispenser.