How To Remove A Brass Mailbox Post
Brass mailbox – Before replacing your mailbox posts, you must remove the old post. A Record in cement is much more difficult to remove than a post that has just been buried. If your post cement base is secure, you may need to select a different area along the front of your yard in which to install your new brass mailbox.
How to remove a brass mailbox post; dig around your post with your shovel. If you hit the concrete, widen your perimeter of the hole until it is greater than the Post’s concrete foundation. Water the soil inside and around the hole and brass mailbox posts to loosen the soil. Wiggle and pull on your mailbox posts. Continue to try to loosen it from the ground. If you are making little progress, you can try to pry the post out of the ground with a 2-inch by 4-inch wood scrap and a jack.
12 Photos Gallery of: How to Remove a Brass Mailbox Post
As a result, remove your 2-inch by 4-inch piece of wood to the brass mailbox post in the 90-degree angle. Attach the piece on a hill just low enough to fit your jack below. Then place the jack under the piece of wood and pump the jack level. Continue pumping to lift the post and its base from the ground.