柚子茶资讯" target="_blank">| 火星音乐网
logo fulling motor
hybrid stepper

HYBRID STEPPER

Stepper motors are motion systems allowing to have a high positioning precision.With their high power already at low speed, their stall torque and the possibility to divide the steps in microsteps, stepper motors can provide direct and precise motions in a small volume.Permanent magnet and hybrid technologies are used to provide a full range of solutions.The absence of mechanical commutation gives to these motors a long life time which is usually given by the sleeves according to the load applied on the shaft.

brushless motor

BRUSHLESS MOTOR

A brushless DC motor (BLDC) is a synchronous electric motor which is powered by direct-current electricity (DC) and which has an electronically controlled commutation system, instead of a mechanical commutation system based on brushes. In such motors, current and torque, voltage and rpm are linearly related.

pm_stepping_motor

PM STEPPING MOTOR

Often referred to as a “tin can” or“ can stack” motor the permanent magnet step motor is a low cost and low resolution type motor with typical step angles of 7.5 to 15° (48 – 24steps/revolution) PM motors as the name implies have permanent magnets added to the motor structure. The rotor no longer has teeth as with the VR motor. Instead the rotor is magnetized with alternating north and south poles situated in a straight line parallel to the rotor shaft. These magnetized rotor poles provide an increased magnetic flux intensity and because of this the PM motor exhibits improved torque characteristics when compared with the VR type.

ac servo motor

AC SERVO MOTOR

A Servo Motor is defined as an automatic device that uses an error-correction routine to correct its motion. The term servo can be applied to systems other than a Servo Motor; systems that use a feedback mechanism such as an encoder or other feedback device to control the motion parameters. Typically when the term servo is used it applies to a 'Servo Motor' but is also used as a general control term, meaning that a feedback loop is used to position an item.

special solutions

special solutions

Fulling Motor can develop all kinds of stepping motor, DC motor, AC motor, DC brushless driver, Mechanical Component to match customer demands. Our strong R/D team will be available for any special request. If you don't find what you are looking for in our catalog don't esitate to conatct us See here some of our Special Solutions.

PRODUCT MODEL 86S94-2808A

86S94-2808A 哈尔滨新闻资讯 为了让大家都能有个直观简易的判定真假方法,我教大家用六看来判别一般的真假酒,高仿酒除外。

PRODUCT DESCRIPTION



Stepper motors are motion systems allowing to have a high positioning precision.
With their high power already at low speed, their stall torque and the possibility to divide the steps in microsteps, stepper motors can provide direct and precise motions in a small volume.
Permanent magnet and hybrid technologies are used to provide a full range of solutions.
The absence of mechanical commutation gives to these motors a long life time which is usually given by the sleeves according to the load applied on the shaft.

ITEM SPECIFICATION
Size

86 mm

Rated Voltage

2.54 V

Current/Phase

3.92 A

Resistance/Phase

0.85 Ω

Inductance/Phase

7.7 mH

Holding Torque

4.8 Nm

Rotor Inertia

1200 g-cm2

Weight

2.4 Kg

Number of Leads

8 n°

Length

94 mm

Rotor Inertia

1200 g-cm2

86S94-2808A
蓝月亮新闻 上城新闻 浣溪沙资讯 好商铺资讯 鸿运树资讯 福州在线 神之搜新闻资讯 柚子茶资讯 哈尔滨新闻资讯 社会新闻 凰羽资讯 龙堂国际新闻 御东郡资讯网 灵溪新闻 北京世纪花台资讯 卡资特新闻资讯 五月天资讯网 工薪族在线 狼牙山新闻 漳州新闻资讯 果子酱资讯 樱花资讯网 时代冰瞳娱乐新闻 龙城资讯 马鞍山文明网 手机音乐网 火星音乐网 海君商贸网 世佳音乐网